SIKA AKTIVATOR-205

SIKA® AKTIVATOR-205 (SIKA® CLEANER-205)

Sika® Aktivator-205 is used to activate non-porous substrates like:

  • Metals
  • Plastics
  • Glazed ceramics
  • Painted surfaces

USE

Wipe bond faces with a clean lint-free paper towel moistened with Sika® Aktivator-205. Change paper towel after each wipe. If pre-treated area is not bonded after 2 hours the activation process has to be repeated (max. 2 times). Ideal application and surface temperature is between 15ºC and 25ºC. Consumption depends on the specific nature of the substrates and manufacturing process. Tightly re-seal container immediately after each use. Prolonged exposure to atmospheric moisture will cause Sika® Aktivator-205 to become opaque/cloudy and therefore inactive. Discard any product in this condition. Flash-off times may vary depending on climatic conditions

CHARACTERISTICS AND ADVANTAGES

Sika® Aktivator-205 is used to activate the following non-porous substrates:

  • Metals
  • Plastics
  • Glazed ceramics
  • Painted surfaces

This product is suitable for experienced users only. Test with actual substrates and conditions have to be performed to ensure adhesion and material compatibility

PACKAGING

250 ml can

COLOUR

Clear

Available Colour
  • Clear