GET YOUR QUESTIONS ANSWERED HERE!

Hello Jim,

You can use SIKA® MULTISEAL BT. This is a high adhesive, butyl rubber sealing tape. It’s excellent self-adhesive bond properties for plastic, glass, steel, polycarbonate, timber and more. It is a reinforced aluminium film for maximum strength and will work brilliantly.

Hello Samuel.

We now have a new product which has just been released and it is called SIKABOND® SPRAYFIX®. It is an easy to apply aerosol contact adhesive, which would be ideal to get that hood lining back to its original position. Alternatively, you may want to use SIKA® CONTACT 4600, which can be applied with a brush or spreader.

Hi Jim.

We suggest you SIKADUR®33 CONCRETE FIX KIT which is a 2-component, 100% solids, moisture-tolerant, high-modulus, high-strength, structural, smooth-paste epoxy adhesive. It is ideal for mortar, bricks, blocks, masonry and render.

Hi Nick.

Yes we do! Our SIKABOND® PVA is a universal PVA wood working glue for use in interior and exterior applications, with excellent bond streng

Hello Mark.

No you don’t need to use water. SIKA® POST FIX’s unique design means that no water is needed.

Simply roll the bag up tightly until the seam separating the two components breaks. Then rub the bag back and forth across a 90 degree angle (no sharp corners) for 20 seconds to mix the product. Once mixed, simply cut one of the corners with a pair of scissors and pour the Post Fix evenly around the pole. Post Fix expands rapidly, filling the hole and fixing the post in place. SIKA® POST FIX sets in just 3 minutes with full strength in 2 hours If there is any excess material cured above the surface, cut it away with a sharp knife. Then cover with a little top-soil and the job’s done.

Hi Craig.

This is a very common problem and we have two products that would do the trick and seal gaps smaller than 30mm. You could use either SIKAFLEX® PRO or SIKAFLEX® 11FC. Both are one component, thixotropic, polyurethane based joint sealants. They cure under the influence of atmospheric moisture to form an elastomeric material with adhesive properties and are perfect for light-weight construction metals. Either one would be fine to use. Good luck!

Hi Scott.

SIKA® CONTACT 4600 or SIKABOND® T55J are the best products for the job. They are both one part and easy to use. SIKABOND® T55J also has excellent elasticity and sound dampening qualities. Parquetry floors can be sanded after 12 hours. They have a quick tack free time with low odour. They have excellent bead stability and they are the perfect products to stick down your synthetic turf. They are a high strength, multipurpose contact adhesive and are fast drying and both heat and water resistant. I hope this helps!

Hello Tim.

Thanks for your request. We have a couple of products that would work well. They are SIKAFLEX® 11FC and SIKAFLEX® PRO. Both products are multi-purpose, high strength, flexible polyurethane adhesives / sealants and will bond to all common construction materials and are cuttable, sandable and paintable. Either one will work well for your project.

Hello Marianne.

We can help with that. We recommend you use SUPERGRIP® 30. It’s a transparent polyurethane paste adhesive and cures in only 30 minutes. It is ready to use, and bonds to particle board flooring, Timber & MDF, Marble & Stone, Concrete Block/blocks, Glass, Fibre cement, Tiles, Rubber, Metals and Aluminium.

Hello Glenn.

SIKASIL®AP is a multipurpose roof and gutter silicone sealant and is an excellent adhesive for non-porous construction materials including polycarbonate, metals and other interior and exterior applications. It has good flexibility and durability and this product is perfect for the job. I would also recommend SIKASIL® WS 305 CN, which is an industrial grade, high flexibility silicone sealant. It has Excellent UV, weathering and high temperature resistance properties. You could also use SIKA® MULTISEAL BT. Either product would work fine.

Joe,

SIKA® MAXTACK® is a one part high strength, copolymer dispersion adhesive and it has an ultrafast grab of 3 seconds. SIKA® MAXTACK® is suitable to bond decorative parts as skirting board, wood frame, panel, terra cotta tile, anodised aluminium, hard PVC profiles, polystyrene moulding and more. It is also odorless.

Hi Cristina. Thanks for using our products and to get the most out of your SIKABOND® TECHGRIP, simply store it upside down or squeeze the bottle to let all the air out and then seal it.

Hi James.

No you don’t need to remove the old SIKAFLEX® 11FC as polyurethane sticks to polyurethane. However if you were using silicone, then you would need to remove the old silicone, as you cannot stick new silicone to old silicone.

Hi Andrew. Yes I can help you there. The tensile strength of the Sika superglues are 20 N/mm2

Hi Jameel. The compressive strength for SIKA® MULTIKIT is 83N/mm2

Hi Tonino.

We have quite a few products that are neutral curing. You can select from the following as they all have different application purposes:

SIKASIL® WS 305 is a neutral curing silicone sealant and can be used for weatherproofing and sealing applications.
We also suggest SIKASIL® CAP is a one-component, neutral-curing, low odor silicone sealant with good adhesion and long shelf life for DIY application.
SIKASIL® POOL is a one part neutral curing silicone sealant for use in swimming pools and permanently wet areas.
SIKASIL® AUTO is a premium, neutral-curing silicone sealant which displays excellent adhesion to a wide range of substrates and provides a permanent, flexible bond or seal. The cured product can withstand exposure to sunlight, salt spray and extreme temperatures.
SIKASIL® AP is a one part neutral curing multi purpose silicone sealant suitable for indoor and outdoor applications. SIKASIL® AP provides weatherproof joints between various substrates such as: glass, metals painted surfaces, wood, ceramic tiles and more.

Hi David.

Yes, we have a product called SIKABOND® SPRAYFIX. It is an easy to apply aerosol contact adhesive, that is ideal for a range of DIY and Handyman applications. You could also use any of the Polyurethanes, which will stick to fiberglass. Try either SIKAFLEX® 11FC or SIKAFLEX® PRO

Hello Louis.

SIKA® BOOM fast acting expanding foam comes in 500mL and 750mL canisters and makes 25L and 38L respectively.

Hello Michael.

You can use SIKABOND® TECHGRIP, which is a high strength multipurpose, polyurethane glue that provides a super strong bond to almost any substrate and is ideal for woodworking. It has excellent adhesion qualities.

You could also use SIKABOND® PVA.

Hello Mike, thanks for your enquiry.

We have a product, which is perfect for that type of application. We recommend you use the SIKADUR® 33 CONCRETE FIX KIT. It’s a High strength, structural, rapid curing, smooth paste epoxy adhesive, and it’s suitable as a bonding bridge adhesive paste for concrete and most building materials. It has excellent bond strength and is insensitive to moisture. It is also very easy to apply.

Good luck!

Hi Nathan.

I am sorry to hear that. We have a number of products you can use. Firstly you can use SIKA® BOOM AP as it is a fast curing expanding foam. It can be used to fill the gaps for the majority of the large holes. You can then coat the top with one of our fillers such as SIKA® FILLER 101. It is a premium, fine surface filler, with application thickness up to 3mm per layer. The other option you have is to use SIKA®ONESTRIKE, which fills gaps up to 75mm. I hope this helps with getting your place back to it’s original position.

SIKABOND® SPRAYFIX is a new product we released. It is an easy to apply aerosol contact adhesive, that is ideal for a range of DIY and Handyman projects and will certainly be able to fix your jigsaw puzzles. It is fast drying and it also has a low odor, which means that you can safely spray it indoors.

Hi Rode.

We recommend SIKA® CONTACT 4600AU which is a contact adhesive that has been formulated to meet varied needs for laminate fabrication. This adhesive provides fast drying time, and a strong heat resistant and water resistant bond. It has the ability to be applied by a trowel, roller, brush and spray gun.

Hi Simone and thank you for your question.

You can use SIKABOND® F40. It is an instant setting adhesive for small bonding jobs such as bonding most metals, plastics, rubber, leather, wood and other materials. It is especially suitable for bonding pieces with very smooth surfaces just like your porcelain cup. This will be ideal for you to use.

Hi Joshua. SIKASIL® AP is the product we recommend to be used on polycarbonate. It is a one-part neutral curing multi purpose silicone sealant suitable for indoor and outdoor applications.

Hello William.

You can use either SIKABOND®SPRAYFIX OR SIKA®CONTACT 4600AU. Both are contact adhesives that have been formulated to meet varied needs for laminate fabrication. This adhesive gives fast drying time, and a strong heat resistant and water resistant bond. Both will do the job.

Hello Simone thanks for reaching out.

We have a couple of products that would serve the purpose and they are SIKABOND®FAST or SIKA®MAXTACK. They are both water based, multi purpose construction adhesives providing strong initial grab and high bond strength and a perfect for fixing polystyrene.

Hello Tania.

Thanks for your enquiry. The product you could use is SIKA® FILLER 101, which is a water based, ready to use fine surface filler. It’s suitable for indoor filling work on plaster boards, fabrics and old wallpapers and will leave a smooth finish.

Hi Michael.

We suggest you use SIKAFLEX® 221. It is a high strength, polyurethane, industrial adhesive/sealant. It has a very high adhesive, and has a permanently flexible bond. You can bond and seal in one application and is suitable for use in food preparation areas, as it is NSF-approved for incidental food contact. This is the perfect solution to fix your cool room.

Hello Martin. Yes SIKABOND® SPRAYFIX can be used on lino, plus a number of other surfaces including wood, metal, plastics, cork, foam and fiberglass.

Hi Doreen.

We have a few to recommend and they are as follows: SIKACRYL® SUPER is a one part sealant, designed with all the benefits of a gap sealant and silicone sealant all in one. You could also use SIKASIL® CAP is a one-component, neutral-curing, low odor silicone sealant with good adhesion and long shelf life. SIKASIL® WS 305 is a neutral curing silicone sealant with high movement capability and excellent adhesion to a wide range of substrates.

Hi Ravinder. The short answer is NO. It is not suitable for potable water

Hello Michael.

Glad to help. You should use SIKABOND® TECHGRIP. It is a high-strength, multipurpose polyurethane glue with a low foaming formulation for maximum bond strength on all common construction materials. It is 100% waterproof for interior and exterior applications and is resistant to solvents and other chemicals. This will be perfect to bond your kitchen cabinets.

We recommend you use SIKA® SHOWERBOND, which is a solvent based, fast grab, gun grade adhesive that is used for bonding plastic shower linings to wall linings. It has been specifically formulated for bonding plastic shower linings to gypsum plasterboard or fiber cement wall linings, as well as timber. It is fast curing and will not damage plastic shower liners. Panels can be relocated for up to 30 minutes after positioning.

Hi Nicolas.

You can use SIKAFLEX® PRO. It is a one component, thixotropic, polyurethane based joint sealant. It cures under the influence of atmospheric moisture to form an elastomeric material with adhesive properties. However, you will need to make sure it is fully cured prior to applying the waterproof membrane, as this will become the bond breaker.

Hi Tony.

SIKASIL® POOL would be perfect for this application. It’s suitable for joints in areas under permanent water immersion and frequently wet areas, such as showers, between ceramics, tiles, concrete, glass, metals and other typical building substrates. It has very high resistance to disinfecting or cleaning products and as well as high resistance to fungal attacks.