GET YOUR QUESTIONS ANSWERED HERE!
We will answer all your questions to ensure you get your job done right the first time. Ask us for the right advice and the most appropriate product applications.
Prior to all applications please refer to the product data sheet available on the Sika website. All applications mentioned are examples only and the solutions offered can vary from specific application to specific application.
We suggest you SIKADUR®33 CONCRETE FIX KIT which is a 2-component, 100% solids, moisture-tolerant, high-modulus, high-strength, structural, smooth-paste epoxy adhesive. It is ideal for mortar, bricks, blocks, masonry and render.
Yes we do! Our SIKABOND® PVA is a universal PVA wood working glue for use in interior and exterior applications, with excellent bond streng
No you don’t need to use water. SIKA® POST FIX’s unique design means that no water is needed.
Simply roll the bag up tightly until the seam separating the two components breaks. Then rub the bag back and forth across a 90 degree angle (no sharp corners) for 20 seconds to mix the product. Once mixed, simply cut one of the corners with a pair of scissors and pour the Post Fix evenly around the pole. Post Fix expands rapidly, filling the hole and fixing the post in place. SIKA® POST FIX sets in just 3 minutes with full strength in 2 hours If there is any excess material cured above the surface, cut it away with a sharp knife. Then cover with a little top-soil and the job’s done.
This is a very common problem and we have two products that would do the trick and seal gaps smaller than 30mm. You could use either SIKAFLEX® PRO or SIKAFLEX® 11FC. Both are one component, thixotropic, polyurethane based joint sealants. They cure under the influence of atmospheric moisture to form an elastomeric material with adhesive properties and are perfect for light-weight construction metals. Either one would be fine to use. Good luck!
SIKA® CONTACT 4600 or SIKABOND® T55J are the best products for the job. They are both one part and easy to use. SIKABOND® T55J also has excellent elasticity and sound dampening qualities. Parquetry floors can be sanded after 12 hours. They have a quick tack free time with low odour. They have excellent bead stability and they are the perfect products to stick down your synthetic turf. They are a high strength, multipurpose contact adhesive and are fast drying and both heat and water resistant. I hope this helps!
Thanks for your request. We have a couple of products that would work well. They are SIKAFLEX® 11FC and SIKAFLEX® PRO. Both products are multi-purpose, high strength, flexible polyurethane adhesives / sealants and will bond to all common construction materials and are cuttable, sandable and paintable. Either one will work well for your project.